Integrating Thermokon SR04PS EnOcean wireless room temperature sensor with OpenRemote

20131018_095424Solar energy harvesting temperature sensor with an optional battery for placement in shadow places.

Thermokon SR04PS wireless room temperature sensor is has 3 sensors on board:

  1. temperature (TMP);
  2. set point adjustment (SP);
  3. fan speed switch (FAN).

The data sheet is available on Thermokon website SR04.
In order to make these sensors available in Openremote follow the steps:

  1. Find the device Id using either EnOcean Dolphin View software or taking a look at EnOcean log file in Openremote which is under OpenRemote/logs/enocean subdirectory;
  2. Create new commands for reading out the sensors using the device Id from the previous point and the A5-10-04 EnOcean Equipment Profile (EEP):
    • SR04PS-TMP
      SR04PS-SP
      SR04PS-FAN
  3. Create 3 sensors and link them to commands created in the previous step.

Now you should have 3 new sensors available in the Openremote Designer ready for use during UI design or rules definition.

2 thoughts on “Integrating Thermokon SR04PS EnOcean wireless room temperature sensor with OpenRemote

  1. Hi Michal, can you tell me what kind of information I have to fill in the designer / sensor state inputs ‘On Text’ and ‘Off text’ ?
    I can’t find docs on it…

  2. Hi Olivier. Can you specify exactly what do you mean? There are few places when you can input on and off text.

Comments are closed.